WPS with GeoTIFF support - Revision history

Jmandel: /* Prerequisite libraries */

2019-05-25T05:54:33Z

Prerequisite libraries

← Older revision		Revision as of 05:54, 25 May 2019
Line 3:		Line 3:

	=Prerequisite libraries=		=Prerequisite libraries=
			==Installing by system package manager==
	In order to use this feature, the user must have the [http://trac.osgeo.org/geotiff/ GeoTIFF] library and its dependencies installed. For many linux distributions, it is possible to install these libraries and all dependencies using its package manager, which is highly recommended. Using Ubuntu,		In order to use this feature, the user must have the [http://trac.osgeo.org/geotiff/ GeoTIFF] library and its dependencies installed. For many linux distributions, it is possible to install these libraries and all dependencies using its package manager, which is highly recommended. Using Ubuntu,
	sudo apt-get install geotiff-bin		sudo apt-get install geotiff-bin
Line 11:		Line 12:
	to install all necessary libraries.		to install all necessary libraries.

	~~==GeoTIFF dependencies==~~		==Installing libTIFF from sources==
	===Installing libTIFF from sources===

	GeoTIFF files use the TIFF image format, with geolocation information added. The current stable version of libTIFF is 3.9.4; however, we recommend you use the latest development release of version 4.0. Version 4.0 of libTIFF adds support for what is called BigTIFF, which are images larger than 2^32 bytes. BigTIFF files are often seen in large GeoTIFF datasets that you may want to use with WRF-Fire. To install, get the latest source package from [http://download.osgeo.org/libtiff/ here] or directly from [http://download.osgeo.org/libtiff/tiff-4.0.6.zip here], extract it, and go to the extracted directory in your terminal. You will want to choose a place to install the new libraries, such as <code>~/wpslibs</code> and create this directory by mkdir ~/wpslibs . Run the configure script telling it where you want the library installed, then build and install.		GeoTIFF files use the TIFF image format, with geolocation information added. The current stable version of libTIFF is 3.9.4; however, we recommend you use the latest development release of version 4.0. Version 4.0 of libTIFF adds support for what is called BigTIFF, which are images larger than 2^32 bytes. BigTIFF files are often seen in large GeoTIFF datasets that you may want to use with WRF-Fire. To install, get the latest source package from [http://download.osgeo.org/libtiff/ here] or directly from [http://download.osgeo.org/libtiff/tiff-4.0.6.zip here], extract it, and go to the extracted directory in your terminal. You will want to choose a place to install the new libraries, such as <code>~/wpslibs</code> and create this directory by mkdir ~/wpslibs . Run the configure script telling it where you want the library installed, then build and install.
Line 19:		Line 19:
	make install		make install

	===PROJ.4===		==Installing PROJ.4 from sources==
	In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 upport. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path.		In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 upport. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path.
	./autogen.sh (skip if configure script is already there)		./autogen.sh (skip if configure script is already there)

Jmandel: /* Prerequisite libraries */

2019-05-22T19:43:13Z

Prerequisite libraries

← Older revision		Revision as of 19:43, 22 May 2019
Line 11:		Line 11:
	to install all necessary libraries.		to install all necessary libraries.

	==Installing libTIFF from ~~source~~==		==GeoTIFF dependencies==
			===Installing libTIFF from sources===

	The current stable version of libTIFF is 3.9.4; however, we recommend you use the latest development release of version 4.0. Version 4.0 of libTIFF adds support for what is called BigTIFF, which are images larger than 2^32 bytes. BigTIFF files are often seen in large GeoTIFF datasets that you may want to use with WRF-Fire. To install, get the latest source package from [http://download.osgeo.org/libtiff/ here] or directly from [http://download.osgeo.org/libtiff/tiff-4.0.6.zip here], extract it, and go to the extracted directory in your terminal. You will want to choose a place to install the new libraries, such as <code>~/wpslibs</code> and create this directory by mkdir ~/wpslibs . Run the configure script telling it where you want the library installed, then build and install.		GeoTIFF files use the TIFF image format, with geolocation information added. The current stable version of libTIFF is 3.9.4; however, we recommend you use the latest development release of version 4.0. Version 4.0 of libTIFF adds support for what is called BigTIFF, which are images larger than 2^32 bytes. BigTIFF files are often seen in large GeoTIFF datasets that you may want to use with WRF-Fire. To install, get the latest source package from [http://download.osgeo.org/libtiff/ here] or directly from [http://download.osgeo.org/libtiff/tiff-4.0.6.zip here], extract it, and go to the extracted directory in your terminal. You will want to choose a place to install the new libraries, such as <code>~/wpslibs</code> and create this directory by mkdir ~/wpslibs . Run the configure script telling it where you want the library installed, then build and install.
	./configure --prefix ~/wpslibs		./configure --prefix ~/wpslibs
	make		make
	make install		make install

	==~~Installing GeoTIFF from source~~==		===PROJ.4===
			In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 upport. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path.
	In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 ~~support~~. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path.
	./autogen.sh (skip if configure script is already there)		./autogen.sh (skip if configure script is already there)
	./configure --prefix ~/wpslibs		./configure --prefix ~/wpslibs
	make		make
	make install		make install
	~~If you get missing~~ SQLite3 ~~error, have~~ your sysadmin install it ~~first~~, or see ./README for configuration if you install SQLite3 in a nonstandard location.		PRPJ.4 depends on SQLite3. Have your sysadmin install it is not on your system already, or see ./README for configuration if you install SQLite3 from sources in a nonstandard location.
	~~Now, you~~ can download GeoTIFF from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/ here] or directly from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/libgeotiff-1.4.1.zip here]. Extract the archive and compile with PROJ.4 support.
			==Installing GeoTIFF from sources==

			You can download GeoTIFF from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/ here] or directly from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/libgeotiff-1.4.1.zip here]. Extract the archive and compile with PROJ.4 support.
	./configure --with-libtiff=~/wpslibs --with-proj=~/wpslibs --prefix=~/wpslibs		./configure --with-libtiff=~/wpslibs --with-proj=~/wpslibs --prefix=~/wpslibs
	make		make

Jmandel: /* Prerequisite libraries */

2019-05-22T17:38:03Z

Prerequisite libraries

← Older revision		Revision as of 17:38, 22 May 2019
Line 3:		Line 3:

	=Prerequisite libraries=		=Prerequisite libraries=
	In order to use this feature, the user must have ~~both~~ the [http://trac.osgeo.org/geotiff/ GeoTIFF] library installed. For many linux distributions, it is possible to install these libraries and all dependencies using its package manager, which is highly recommended. Using Ubuntu,		In order to use this feature, the user must have the [http://trac.osgeo.org/geotiff/ GeoTIFF] library and its dependencies installed. For many linux distributions, it is possible to install these libraries and all dependencies using its package manager, which is highly recommended. Using Ubuntu,
	sudo apt-get install geotiff-bin		sudo apt-get install geotiff-bin
	or Fedora,		or Fedora,

Jmandel: /* Prerequisite libraries */ libtiff is dependency for libgeotiff

2019-05-22T17:37:04Z

Prerequisite libraries: libtiff is dependency for libgeotiff

← Older revision		Revision as of 17:37, 22 May 2019
Line 3:		Line 3:

	=Prerequisite libraries=		=Prerequisite libraries=
	In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] ~~and [http://www.libtiff.org/ TIFF] libraries~~ installed. For many linux distributions, it is possible to install these libraries and all dependencies using its package manager, which is highly recommended. Using Ubuntu,		In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] library installed. For many linux distributions, it is possible to install these libraries and all dependencies using its package manager, which is highly recommended. Using Ubuntu,
	sudo apt-get install geotiff-bin		sudo apt-get install geotiff-bin
	or Fedora,		or Fedora,

Jmandel: /* Prerequisite libraries */

2019-05-22T17:35:17Z

Prerequisite libraries

← Older revision		Revision as of 17:35, 22 May 2019
Line 3:		Line 3:

	=Prerequisite libraries=		=Prerequisite libraries=
	In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] and [http://www.libtiff.org/ TIFF] libraries installed. For many linux distributions, it is possible to install these libraries ~~including~~ all dependencies using its package manager, which is highly recommended. Using Ubuntu,		In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] and [http://www.libtiff.org/ TIFF] libraries installed. For many linux distributions, it is possible to install these libraries and all dependencies using its package manager, which is highly recommended. Using Ubuntu,
	sudo apt-get install geotiff-bin		sudo apt-get install geotiff-bin
	or Fedora,		or Fedora,

Jmandel: /* Prerequisite libraries */

2019-05-22T17:34:58Z

Prerequisite libraries

← Older revision		Revision as of 17:34, 22 May 2019
Line 3:		Line 3:

	=Prerequisite libraries=		=Prerequisite libraries=
	In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] and [http://www.libtiff.org/ TIFF] libraries installed. For many linux distributions, it is possible to install these libraries using its package manager, which is highly recommended. Using Ubuntu,		In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] and [http://www.libtiff.org/ TIFF] libraries installed. For many linux distributions, it is possible to install these libraries including all dependencies using its package manager, which is highly recommended. Using Ubuntu,
	sudo apt-get install geotiff-bin		sudo apt-get install geotiff-bin
	or Fedora,		or Fedora,

Jmandel: /* Prerequisite libraries */

2019-05-22T17:33:49Z

Prerequisite libraries

← Older revision		Revision as of 17:33, 22 May 2019
Line 3:		Line 3:

	=Prerequisite libraries=		=Prerequisite libraries=
	In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] and [http://www.libtiff.org/ TIFF] libraries installed. For many linux distributions, it is possible to install these libraries using its package manager. Using Ubuntu,		In order to use this feature, the user must have both the [http://trac.osgeo.org/geotiff/ GeoTIFF] and [http://www.libtiff.org/ TIFF] libraries installed. For many linux distributions, it is possible to install these libraries using its package manager, which is highly recommended. Using Ubuntu,
	sudo apt-get install geotiff-bin		sudo apt-get install geotiff-bin
	or Fedora,		or Fedora,

Jmandel: /* Installing GeoTIFF from source */

2019-05-22T17:32:06Z

Installing GeoTIFF from source

← Older revision		Revision as of 17:32, 22 May 2019
Line 20:		Line 20:
	==Installing GeoTIFF from source==		==Installing GeoTIFF from source==

	In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 support. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path~~. If you get missing SQLite3 error, have your sysadmin install it, or see ./README for configuration if you install SQLite3 in a nonstandard location~~.		In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 support. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path.
	./autogen.sh (skip if configure script is already there)		./autogen.sh (skip if configure script is already there)
	./configure --prefix ~/wpslibs		./configure --prefix ~/wpslibs
	make		make
	make install		make install
			If you get missing SQLite3 error, have your sysadmin install it first, or see ./README for configuration if you install SQLite3 in a nonstandard location.
	Now, you can download GeoTIFF from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/ here] or directly from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/libgeotiff-1.4.1.zip here]. Extract the archive and compile with PROJ.4 support.		Now, you can download GeoTIFF from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/ here] or directly from [ftp://ftp.remotesensing.org/pub/geotiff/libgeotiff/libgeotiff-1.4.1.zip here]. Extract the archive and compile with PROJ.4 support.
	./configure --with-libtiff=~/wpslibs --with-proj=~/wpslibs --prefix=~/wpslibs		./configure --with-libtiff=~/wpslibs --with-proj=~/wpslibs --prefix=~/wpslibs

Jmandel: /* Installing GeoTIFF from source */

2019-05-22T17:30:43Z

Installing GeoTIFF from source

← Older revision		Revision as of 17:30, 22 May 2019
Line 20:		Line 20:
	==Installing GeoTIFF from source==		==Installing GeoTIFF from source==

	In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 support. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path. If you get missing SQLite3 error, have your sysadmin install it, or see ./README.		In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 support. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path. If you get missing SQLite3 error, have your sysadmin install it, or see ./README for configuration if you install SQLite3 in a nonstandard location.
	./autogen.sh (skip if configure script is already there)		./autogen.sh (skip if configure script is already there)
	./configure --prefix ~/wpslibs		./configure --prefix ~/wpslibs

Jmandel: /* Installing GeoTIFF from source */ SQLite3

2019-05-22T17:12:22Z

Installing GeoTIFF from source: SQLite3

← Older revision		Revision as of 17:12, 22 May 2019
Line 20:		Line 20:
	==Installing GeoTIFF from source==		==Installing GeoTIFF from source==

	In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 support. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path.		In order to make use of GeoTIFF images containing projected data, you must compile GeoTIFF with PROJ.4 support. Download the source code for PROJ.4 [http://trac.osgeo.org/proj/ here] or directly from [https://github.com/OSGeo/proj.4/archive/master.zip here], then extract and install it into your library installation path. If you get missing SQLite3 error, have your sysadmin install it, or see ./README.
	./autogen.sh (skip if configure script is already there)		./autogen.sh (skip if configure script is already there)
	./configure --prefix ~/wpslibs		./configure --prefix ~/wpslibs