Difference between revisions of "WRF-Fire merge testing"

From openwfm
Jump to navigation Jump to search
Line 50: Line 50:
  
 
==Angel's test results==
 
==Angel's test results==
All kingspeak runs are in /uufs/chpc.utah.edu/common/home/kochanski-group3/farguella/merge and run on node kingspeak11 and kinspeak12. All the compilation are done using ifort serial (13), nesting 0.
+
All kingspeak runs are in /uufs/chpc.utah.edu/common/home/kochanski-group3/farguella/merge.
  
 
===Branch develop vs. added-fmc_g===
 
===Branch develop vs. added-fmc_g===
 +
 
The {{wrf-fire-merge-branch|develop}} and {{wrf-fire-merge-branch|added-fmc_g}} are in kingspeak in folders WRF-Fire-merge-develop and WRF-Fire-merge-added-fmc_g respectively. They are tested in order to see the first new functionalities of adding variable FMC_G in WRF4 baseline. Tests are from list in https://www.openwfm.org/index.php?title=Porting_WRF-SFIRE_fuel_moisture_model_to_WRF4#Testing_to_be_done.  
 
The {{wrf-fire-merge-branch|develop}} and {{wrf-fire-merge-branch|added-fmc_g}} are in kingspeak in folders WRF-Fire-merge-develop and WRF-Fire-merge-added-fmc_g respectively. They are tested in order to see the first new functionalities of adding variable FMC_G in WRF4 baseline. Tests are from list in https://www.openwfm.org/index.php?title=Porting_WRF-SFIRE_fuel_moisture_model_to_WRF4#Testing_to_be_done.  
 +
 +
All the runs are on node kingspeak11 and kinspeak12 and all the compilations are done using ifort serial (13), nesting 0.
  
 
====fire_fmc_read not present in namelist.input====
 
====fire_fmc_read not present in namelist.input====
Line 87: Line 90:
  
 
* Slope FMC_G field: RF-Fire-merge-added-fmc_g/test/em_fire/hill_tests/fmc_slope.
 
* Slope FMC_G field: RF-Fire-merge-added-fmc_g/test/em_fire/hill_tests/fmc_slope.
 +
 +
===Branch develop vs. fuel-moisture-model without fuel moisture===
 +
The experiments tested are hill_simple and two_fires ideal cases. In the branch fuel-moisture-model, the fuel moisture model is turned off and we want to obtain exactly the same results than using branch develop.
 +
 +
The {{wrf-fire-merge-branch|develop}} and {{wrf-fire-merge-branch|fuel-moisture-model}} are compiled and runned in Cheyenne in folders /gpfs/fs1/p/univ/ucud0004/angelfc/merge/develop* and /gpfs/fs1/p/univ/ucud0004/angelfc/merge/fuel-moiture-model* respectively.
 +
 +
All the simulations are done in folders test/em_fire/hill_simple and test/em_fire/two_fires.
 +
 +
====Intel====
 +
* Serial executions: develop-intel-serial and fuel-moisture-model-intel-serial.
 +
 +
They are compiled using configure option: ifort compiler with icc serial (13), nesting 0.
 +
 +
* Parallel executions: develop-intel-mpi and fuel-moisture-model-intel-mpi.
 +
 +
They are compiled using configure option: ifort compiler with icc dmpar (15), nesting 1.
 +
 +
====PGI====
 +
 +
 +
====GNU====
 +
 +
 +
===WRF in fuel-moisture-model branch===
 +
In order to test WRF in the new {{wrf-fire-merge-branch|fuel-moisture-model}}, the WTF is used. Therefore, the new WTF code is downloaded using
 +
<pre>
 +
wget http://www2.mmm.ucar.edu/wrf/src/wtf_v04.09_small.tar
 +
</pre>
 +
After that, the tar file is uncompressed using
 +
<pre>
 +
tar -xvf wtf_v04.09_small.tar
 +
cd WTF_v04.09
 +
</pre>
 +
Once one try to use ./run_from_github.py python execution, an error appear which says that Data folder is old. So, the new Data folder is downloaded using
 +
<pre>
 +
cd ..
 +
wget http://www2.mmm.ucar.edu/wrf/tmp/data_v04.08.tar
 +
</pre>
 +
After that, the new data is uncompressed and replaced using
 +
<pre>
 +
tar -xvf data_v04.08.tar
 +
rm -fr WTF_v04.09/Data
 +
mv Data WTF_v04.09
 +
</pre>
 +
Then, the new version of the data is updated in line 42 of run_from_github.py file as
 +
<pre>
 +
version="v04.08"
 +
</pre>
 +
It is also needed to provide the account code to run the qsub in file qsub_this_to_run_all_compiler.csh. In our case, it should be
 +
<pre>
 +
#PBS -A UCUD0004
 +
</pre>
 +
Finally, one can run the code doing
 +
<pre>
 +
./run_from_github.py
 +
</pre>
 +
One needs to give also the github repository to test and the branch which are going to be:
 +
<pre>
 +
URL of the repository: https://github.com/openwfm/WRF-Fire-merge
 +
branch: fuel-moisture-model
 +
</pre>
  
 
==Adam's test results==
 
==Adam's test results==

Revision as of 20:20, 7 February 2019


Please see Talk:WRF-Fire_merge_testing for permanent notes.

The basics

The version to test is branch fuel-moisture-model currently at commit c1cedfc7eba28a2ed

The baseline is WRF4 branch develop currently at commit 0f296f9c0f674f9

When either branch advances we have to retest - after any fix in fuel-moisture-model, and, after we are done, we will have to forward branch develop to current WRF4 and merge it into fuel-moisture-model. For this reason (and to reduce confusion), I am trying to organize the tests in a way that they are really easy to rerun without modifying any files - separate clones for different compilation options and separate copies of test/em_fire directory for different test cases.

The namelist.input and namelist.fire with variables that turn the fuel moisture model and fire on are in test/em_fire_rain/rain. The description of the namelist variables is at Fuel_moisture_model#Configuration. Other features from WRF-SFIRE are not carried over - only the fuel moisture model.

Who is doing what

  • Angel - WTF, parallel testing of both branches for identical results, all test cases in test/em_fire
  • Adam - a real problem
  • Jan - fixing, selected testing as needed


How to test

  • Record also unsuccessful tests, when fixed, replace by the final result and include link to the commit used
  • All tests should be reproducible by checking out the commit noted, which should include all data for ideal runs
  • For real runs, please link to the datasets to be reproducible

What needs to be tested

  • Fuel moisture model off vs. WRF4 baseline, with and without fire, did we change anything?
  • reading fmc_g, is it doing what it should?
  • Fuel moisture model on, fire on, is it doing what it should?
  • Serial and parallel execution with different numbers of CPUs, are the numbers same?
  • WTF as specified in WRF testing requirements
  • All ideal cases in test/em_fire and some real

Jan's test results

All kingspeak runs are in /uufs/chpc.utah.edu/common/home/u6015690/merge and run on node kingspeak11 (nodes can be different).

Baseline

branch develop 0f296f9c0f674f9

  • ifort serial (13), nesting 0, configure -d, WRF-Fire-merge-develop/test/em_fire/

Using fmc_g

Fuel moisture model

branch fuel-moisture-model, copies of test/em_fire as em_fire_xxxx

Angel's test results

All kingspeak runs are in /uufs/chpc.utah.edu/common/home/kochanski-group3/farguella/merge.

Branch develop vs. added-fmc_g

The branch develop and branch added-fmc_g are in kingspeak in folders WRF-Fire-merge-develop and WRF-Fire-merge-added-fmc_g respectively. They are tested in order to see the first new functionalities of adding variable FMC_G in WRF4 baseline. Tests are from list in https://www.openwfm.org/index.php?title=Porting_WRF-SFIRE_fuel_moisture_model_to_WRF4#Testing_to_be_done.

All the runs are on node kingspeak11 and kinspeak12 and all the compilations are done using ifort serial (13), nesting 0.

fire_fmc_read not present in namelist.input

One can observe that both simple hill simulations are exactly the same running

diff WRF-Fire-merge-develop/test/em_fire/wrf.log WRF-Fire-merge-added-fmc_g/test/em_fire/hill_tests/original/wrf.log -I Timing

which returns

10c10
<    alloc_space_field: domain            1 ,              344571608  bytes allocated
---
>    alloc_space_field: domain            1 ,              345388824  bytes allocated

Therefore, the only difference is in the allocation size as expected.

However, the new branch added-fmc_g is creating new variable FMC_G taken constant value of fuelmc_g from namelist.fire all over the domain. Changing value of fuelmc_g in namelist.fire changes the value of the new variable FMC_G.

fire_fmc_read present in namelist.input

Setting

fire_fmc_read=0

and poblating FMC_G variable in wrfinput_d01 using ncreplace in Matlab. The branch added-fmc_g uses the new FMC_G in the simulation from new wrfinputs. Tested using:

  • Constant FMC_G field of 0.07: WRF-Fire-merge-added-fmc_g/test/em_fire/hill_tests/fmc_07.
  • Constant FMC_G field of 0.08: WRF-Fire-merge-added-fmc_g/test/em_fire/hill_tests/fmc_08. Exactly the same results that branch develop which was taking the information from namelist.fire file.
  • Random FMC_G field: WRF-Fire-merge-added-fmc_g/test/em_fire/hill_tests/fmc_rand. Gives the progression with random bumps as expected.
  • Slope FMC_G field: RF-Fire-merge-added-fmc_g/test/em_fire/hill_tests/fmc_slope.

Branch develop vs. fuel-moisture-model without fuel moisture

The experiments tested are hill_simple and two_fires ideal cases. In the branch fuel-moisture-model, the fuel moisture model is turned off and we want to obtain exactly the same results than using branch develop.

The branch develop and branch fuel-moisture-model are compiled and runned in Cheyenne in folders /gpfs/fs1/p/univ/ucud0004/angelfc/merge/develop* and /gpfs/fs1/p/univ/ucud0004/angelfc/merge/fuel-moiture-model* respectively.

All the simulations are done in folders test/em_fire/hill_simple and test/em_fire/two_fires.

Intel

  • Serial executions: develop-intel-serial and fuel-moisture-model-intel-serial.

They are compiled using configure option: ifort compiler with icc serial (13), nesting 0.

  • Parallel executions: develop-intel-mpi and fuel-moisture-model-intel-mpi.

They are compiled using configure option: ifort compiler with icc dmpar (15), nesting 1.

PGI

GNU

WRF in fuel-moisture-model branch

In order to test WRF in the new branch fuel-moisture-model, the WTF is used. Therefore, the new WTF code is downloaded using

wget http://www2.mmm.ucar.edu/wrf/src/wtf_v04.09_small.tar

After that, the tar file is uncompressed using

tar -xvf wtf_v04.09_small.tar
cd WTF_v04.09

Once one try to use ./run_from_github.py python execution, an error appear which says that Data folder is old. So, the new Data folder is downloaded using

cd ..
wget http://www2.mmm.ucar.edu/wrf/tmp/data_v04.08.tar

After that, the new data is uncompressed and replaced using

tar -xvf data_v04.08.tar
rm -fr WTF_v04.09/Data
mv Data WTF_v04.09

Then, the new version of the data is updated in line 42 of run_from_github.py file as

version="v04.08"

It is also needed to provide the account code to run the qsub in file qsub_this_to_run_all_compiler.csh. In our case, it should be

#PBS -A UCUD0004

Finally, one can run the code doing

./run_from_github.py

One needs to give also the github repository to test and the branch which are going to be:

URL of the repository: https://github.com/openwfm/WRF-Fire-merge
branch: fuel-moisture-model

Adam's test results

See also